Do I need to test for RADON?
If you live in Colorado…anywhere in Colorado…you need to test, at least initially, for RADON Gas.
What is the recommended SAFE level for RADON Gas?
There is NO SAFE LEVEL OF RADON GAS. The USEPA openly admits this. However, limits need to be met or mitigations would occur willy nilly! Many, many factors enter into the health hazard equation.
1. Do you Smoke?
2. Do you actively live in the affected space?
3. Is the affected space only occasionally used?
4. Are there windows or doors to the outside environment in the affected space?
5. Are you immuno-compromised?
6. Concentration of RADON Gas.
7. Length of time for direct exposure.
8. Differences in Homo Sapiens genetic propensity toward cancer, particularly lung cancer.
Just to name a few. The calculation is extremely complicated, and there are many more factors than just the eight listed above.
What do my testing numbers mean?
Firstly, RADON is measured in Pico Curies per Liter or: pCi/L
This is a measure of how much RADON gas is in a single liter of breathable air.
Testing Result => USEPA Recommended Action
0.0 – 4.0 pCi/L => No action required…no health hazard
4.0 – 9.9 pCi/L => This is high enough to warrant either additional long term testing, or go direct to mitigation. Health hazard possible.
10.0 – more => Go directly to mitigation…health hazard imminent
Who do I trust with this horrendous health threat?
Currently in Colorado, there is no certification required to perform either testing and evaluation, or mitigation. It may be disturbing to note that as high as 97% of those who are actively engaged in RADON testing and mitigation have no higher education degree. If they have a degree, it is most likely NOT in either geology or environmental science. Ask yourself this question, “…do I really want an uneducated ‘technician’ conducting testing for a hazardous material in my living environment, who has only a rudimentary knowledge of that hazardous material?”
What does Certification REALLY Mean?
So-called CERTIFICATION is conducted through PRIVATE COMPANIES! CERTIFICATION is NOT performed through any government agency or public school in Colorado. Moreover, there are two PRIVATE, Incorporated, corporations who have set themselves up as the sole source and authority for all things dealing with RADON.
Mind you, these are the same private corporations who have numerous subsidiary companies that build most of the testing and mitigation equipment that the so-called EXPERTS say is what should be used in the industry, and using ONLY the procedures and construction techniques that THEY recommend.
Nothing is being said here, but is there the possibility that obvious conflicts of interest may at some point drive the RECOMMENDED materials and methods?
CERTIFICATION is a 40-hour course. That is 8 hours a day for 5 days. PERIOD! It deals with all of the RECOMMENDED private company methods and materials produced by the subsidiaries of the certification AUTHORITIES.
THERE IS NO OVERSIGHT OF CERTIFIED INDIVIDUALS TO SEE IF THEY ARE PERFORMING THEIR JOB OPTIMALLY.
THERE IS NO PROCEDURE IN PLACE TO IMMEDIATELY REMOVE A CERTIFICATION FOR ANY CERTIFIED INDIVIDUAL MAKING ERRORS ON A REGULAR BASIS.
SO THE CERTIFICATION IS WHOLLY MEANINGLESS!!!